Nissan has revived the Sentra Spec-V name for a 2026 SEMA concept featuring 300 horsepower at the wheels, a turbocharged 2.0-liter engine and a six-speed manual transmission. The extensively modified sedan celebrates the Sentra SE-R’s American performance heritage, but Nissan has not announced a production version.
Unveiled on October 28, 2026, the Nissan Sentra Spec-V concept is one of three new performance-oriented builds the automaker is bringing to the SEMA Show in Las Vegas, November 3–6. Its arrival marks 35 years since the original Sentra SE-R reached North America, revisiting a period when Nissan offered American buyers a compact sedan with a distinctly enthusiast-focused character.
The concept is more than a styling exercise. Nissan has rebuilt the Sentra’s powertrain, installed a manual transmission from the Juke NISMO RS and borrowed substantial braking and interior hardware from the GT-R NISMO. However, the company explicitly identifies the vehicle as a SEMA concept that is not available for purchase.
300 Horsepower at the Wheels, Not a Conventional Engine Rating
The most revealing detail appears in Nissan’s official Spec-V build sheet. Although the general announcement describes a 300-horsepower turbocharged 2.0-liter engine, the technical document specifies 300 whp, meaning horsepower measured at the wheels rather than the crankshaft.

That distinction matters when comparing the concept with production vehicles, whose advertised horsepower figures generally represent engine output. Nissan has not supplied an equivalent crankshaft horsepower rating for this build.
The concept retains the MR20DD engine architecture but receives extensive modifications to support its increased output. These include a Garrett G25-550 turbocharger, front-mounted intercooler, Carrillo connecting rods, JE pistons and upgraded internal components. Nissan also specifies a 10:1 compression ratio, supplemental port fuel injection using Bosch EV14 injectors and an upgraded AEM fuel pump.
Rather than retaining the production Sentra’s continuously variable transmission, Nissan installed a modified RS6F94R six-speed manual gearbox sourced from the Juke NISMO RS. The transmission incorporates a helical limited-slip differential, while a Centerforce lightweight flywheel and FX350 clutch kit complete the drivetrain modifications.
The limited-slip differential is particularly relevant to the front-wheel-drive layout, helping distribute torque between the driven wheels when traction differs. Nissan has not published acceleration figures, lap times or other independently verified performance measurements for the concept.
GT-R NISMO Brakes and Track-Focused Suspension
Nissan also made substantial chassis changes to accompany the engine upgrade. The Spec-V uses a custom track-oriented version of NISMO Sentra coilovers, incorporating more aggressive spring rates, revised damping and front shock absorbers with external reservoirs. NISMO anti-roll bars provide additional suspension tuning.

The braking system comes from the R35-generation GT-R NISMO. Nissan’s build sheet specifies six-piston Brembo front calipers with 15.35-inch rotors and four-piston rear calipers with 15.0-inch rotors. Both ends use two-piece, cross-drilled, full-floating discs.
Forged NISMO LM-RS1 wheels measure 19 by 9.5 inches and wear 265/35R19 Yokohama ADVAN NEOVA AD09 tires. The combination represents a significant departure from the equipment expected on a conventional compact commuter sedan.
Exterior modifications include a BOMEX widebody kit, a custom vented hood, a side-exit exhaust and an oversized rear spoiler sourced from the GT-R NISMO. Inside, Nissan fitted GT-R NISMO Recaro front seats, a NISMO steering wheel and a custom harness bar.
A Sentra SE-R Tribute, Not a Confirmed Production Revival
The Sentra Spec-V concept draws on a recognizable part of Nissan’s North American history. The original Sentra SE-R arrived 35 years before this announcement, establishing the nameplate’s reputation among sport-compact enthusiasts. Later Spec-V variants continued that performance-oriented approach.
The 2026 concept explores how that formula might look with modern turbocharging, upgraded chassis components and parts borrowed from other Nissan performance vehicles. Its six-speed manual transmission is especially notable because Nissan deliberately replaced the regular Sentra’s automatic transmission arrangement rather than simply adding engine power.
Nevertheless, Nissan’s own SEMA information makes the vehicle’s status clear: the Spec-V is a one-off concept, not a new trim available at dealerships. The company says ideas from SEMA projects can influence future vehicles and accessories, but it has announced no production specifications, pricing or release date for a revived Sentra Spec-V.
Two Nissan Z Projects Join the Sentra at SEMA
Nissan’s November 2026 SEMA display also includes two different interpretations of the Z sports car.
The Project NAT2 SCCA Touring 2 Z was developed by the Nissan Acceleration Team, a volunteer group of Nissan employees involved in motorsports outside their regular jobs. Built to SCCA Touring 2 specifications, it features upgraded engine, suspension and braking components, along with a stripped interior, roll cage and competition safety equipment. It is a purpose-built competition project rather than a new road-going Z variant.
The Datsun S30 concept takes a different approach. Created with longtime Nissan collaborator and Formula Drift champion Chris Forsberg, the restomod combines the original Z’s body design with the twin-turbocharged V6 powertrain from the modern Nissan Z. NISMO engine upgrades, lightweight carbon-fiber body panels and custom suspension and braking components complete the project.
Nissan will display these vehicles alongside the custom open-top Z Kaze concept at booth 21521 in the Las Vegas Convention Center’s Central Hall from November 3 through November 6, 2026. Additional Nissan truck and SUV concepts are scheduled to be detailed separately.
